The ideal spa pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2.
AquaSPArkle Immerse has been designed to remove the grease and oils that build-up on the filter cartridge and can lead to impaired filtration. For best results, use on a monthly basis. Apply the 100g sachet to a clean bucket containing clean water to form a highly effective filter cleaning solution. Leave the cartridge to soak for a minimum of 8 hours. For best results, allow the cartridge filter to dry before putting back into operation.
Pool Check® 3in1 offers the user more than just another test strip; it offers accurate results that you can rely on. Pool Check® 3in1 has been specially designed to work in pools, spas and hot tubs chlorine systems. Economically priced, Pool Check® 3in1 is the ideal choice for the average pool, hot tub or spa owner.
AquaSparkle Spa TA Plus is a fine, rapid dissolving powder used for increasing the total alkalinity of your spa water. Apply when total alkalinity falls below 80mg/l (ppm) and then maintain the total alkalinity within the desired range of 80 – 150mg/l (ppm).
AquaSPArkle Spa Hardness Plus is an effective product used for increasing calcium hardness levels within your spa water. Calcium hardness levels should be maintained within the recommended range of 100 – 200mg/l (ppm) to ensure that the spa and spa equipment is protected.
AquaSPArkle Hot Tub Multifunctional 20g Chlorine Tablets are a popular, widely used chlorine sanitiser for spas. The slow eroding nature of these tablets allows them to maintain recommended chlorine levels over a longer period of time compared with chlorine granules. These tablets also contain clarifier helping to achieve crystal clear, sparkling water.
Insta-TEST® PRO Salt strip measures from 1500, 2000, 2500, 3000, 3500, 4000, and 5000 ppm in 20 seconds. The salt strips are packaged with 50 strips per bottle